Nema 8 (20mm) matoorada jaranjarada jaranjarada ah ee godan
>> Sharaxado Gaaban
| Nooca Baabuurta | Laba-cirifoodka |
| Xagasha tilaabada | 1.8° |
| Voltage (V) | 2.5 / 6.3 |
| Hadda (A) | 0.5 |
| Iska caabin (Ohms) | 5.1 / 12.5 |
| Inductance (mH) | 1.5 / 4.5 |
| Xadhkaha rasaasta | 4 |
| Qabashada Torque (Nm) | 0.02 / 0.04 |
| Dhererka Baabuurka (mm) | 30/42 |
| Heerkulka deegaanka | -20 ℃ ~ +50 ℃ |
| Heerkulka Sare u kaca | 80K Max. |
| Xoogga Dielectric | 1mA ugu badnaan@ 500V, 1KHz, 1sek |
| Iska caabinta dahaarka | 100MΩ Min.@500Vdc |
>> Shahaadooyinka
>> Qalabka Korontada
| Cabbirka Matoorka | Voltage/ Marxaladda (V) | Hadda/ Marxaladda (A) | iska caabin/ Marxaladda (Ω) | Dhalin / Marxaladda (mH) | Tirada Xadhkaha rasaasta | Rotor Inertia (g.cm2) | Qabashada Torque (Nm) | Dhererka Matoorka L (mm) |
| 20 | 2.5 | 0.5 | 5.1 | 1.5 | 4 | 2 | 0.02 | 30 |
| 20 | 6.3 | 0.5 | 12.5 | 4.5 | 4 | 3 | 0.04 | 42 |
>> Halbeegyada farsamada guud
| Nadiifinta shucaaca | 0.02mm ugu badnaan (450g oo raran) | Iska caabin dahaarka | 100MΩ @500VDC |
| Axial nadiifinta | 0.08mm ugu badnaan (450g oo raran) | Awoodda korontada | 500VAC, 1mA, 1s@1KHZ |
| Xamuulka shucaaca ugu badan | 15N (20mm laga soo bilaabo dusha flange) | fasalka dahaarka | Fasalka B (80K) |
| Culayska axial ee ugu sarreeya | 5N | Heerkulka deegaanka | -20 ℃ ~ +50 ℃ |
>> 20HK2XX-0.5-4B sawirka dulucda matoorka
>> qalooca-soo noqnoqda
Xaaladda tijaabada:
Chopper wadida, ma raagid, talaabada yar ee nuska ah, danab wadista 24V
>> Anaga ku saabsan
Alaabadayada waxaa lagu soo saaraa alaabta ceeriin ee ugu fiican.Daqiiqad kasta, waxaan si joogto ah u wanaajinaa barnaamijka wax soo saarka.Si loo xaqiijiyo tayada iyo adeeg wanaagsan, waxaan diiradda saarnay habka wax soo saarka.Amaan sare ayaanu ku helnay lammaane.Waxaan rajeyneynaa inaan xiriir ganacsi la sameyno.
Haddii mid ka mid ah alaabtan ay danaynayaan, fadlan nala soo socodsii.Waxaan ku qanci doonnaa inaan ku siino oraah ka dib markii la helo mid ka mid ah tilmaamihiisa faahfaahsan.Waxaan leenahay injineeradayada R&D ee khibrada u leh si ay u buuxiyaan shuruudaha mid ka mid ah, Waxaan u muuqaneynaa inaan ku faraxsannahay inaan helno su'aalahaaga dhawaan' waxaana rajeyneynaa inaan helno fursad aan kula shaqeyno mustaqbalka.Ku soo dhawoow inaad hubiso shirkadeena.
Qaybaha alaabta
-
Nema 17 (42mm) matoorada jaranjarada jaranjarada ee godan
-
Nema 11 (28mm) matoorada jaranjarada jaranjarada ee godan
-
Nema 34 (86mm) matoorada jaranjarada jaranjarada godlan
-
Nema 14 (35mm) matoorada jaranjarada jaranjarada ee godan
-
Nema 24 (60mm) matoorada jaranjarada jaranjarada ee godan
-
Nema 23 (57mm) matoorada jaranjarada jaranjarada ee godan
