Nema 17 (42mm) Qalabka meeraha meeraha meeraha meeraha
>> Sharaxado Gaaban
| Nooca Baabuurta | Laba-cirifoodka |
| Xagasha tilaabada | 1.8° |
| Voltage (V) | 2.6 / 3.3 / 2 / 2.5 |
| Hadda (A) | 1.5 / 1.5 / 2.5 / 2.5 |
| Iska caabin (Ohms) | 1.8 / 2.2 / 0.8 / 1 |
| Inductance (mH) | 2.6 / 4.6 / 1.8 / 2.8 |
| Xadhkaha rasaasta | 4 |
| Qabashada Torque (Nm) | 0.22 / 0.35 / 0.5 / 0.6 |
| Dhererka Baabuurka (mm) | 34/40/48/60 |
| Saamiga dhimista | 10/5/4/100/50/40/25/20/16 |
| Heerkulka deegaanka | -20 ℃ ~ +50 ℃ |
| Heerkulka Sare u kaca | 80K Max. |
| Xoogga Dielectric | 1mA ugu badnaan@ 500V, 1KHz, 1sek |
| Iska caabinta dahaarka | 100MΩ Min.@500Vdc |
>> Shahaadooyinka
>> Qalabka Korontada
| Cabbirka Matoorka | Voltage/ Marxaladda (V) | Hadda/ Marxaladda (A) | iska caabin/ Marxaladda (Ω) | Dhalin / Marxaladda (mH) | Tirada Xadhkaha rasaasta | Qabashada Torque (Nm) | Dhererka Matoorka L (mm) |
| 42 | 2.6 | 1.5 | 1.8 | 2.8 | 4 | 0.22 | 34 |
| 42 | 3.3 | 1.5 | 2.2 | 4.6 | 4 | 0.35 | 40 |
| 42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 0.5 | 48 |
| 42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 0.6 | 60 |
>> Halbeegyada farsamada guud
| Nadiifinta shucaaca | 0.02mm ugu badnaan (450g oo raran) | Iska caabin dahaarka | 100MΩ @500VDC |
| Axial nadiifinta | 0.08mm ugu badnaan (450g oo raran) | Awoodda korontada | 500VAC, 1mA, 1s@1KHZ |
| Xamuulka shucaaca ugu badan | 25N (20mm laga soo bilaabo dusha flange) | fasalka dahaarka | Fasalka B (80K) |
| Culayska axial ee ugu sarreeya | 10N | Heerkulka deegaanka | -20 ℃ ~ +50 ℃ |
>> 42HS2XX-X-4AG sawir sawireedka matoorka
| Dhererka sanduuqa Gear L1 (mm) | Saamiga dhimista |
| 42 | 10/5/4 |
| 52 | 100/50/40/25/20/16 |
>> Anaga ku saabsan
Waxaan haynaa 8 xabbo oo CNC ah, 1 mashiinka wax lagu shiidayo ee CNC, 1 mashiinka goynta siliga, iyo qaar ka mid ah qalabka kale ee mashiinada.Waxaan awood u leenahay in aan mashiinno inta badan qaybaha aan caadiga ahayn ee nafteena guriga si aan u gaabinno wakhtiga hogaanka ee alaabta la habeeyey, iyo in aan siino macaamiisheena khibrad wax iibsiga oo wanaagsan.Caadiyan, wakhtiga rasaasta ee alaabtayada kaashashka matoorka rasaasta ayaa ah 1 todobaad gudahood, wakhtiga hogaanka kubadana waa ilaa 10 maalmood.
Badeecadahayadu waa 100% shaqaynaya iyo badbaadada la tijaabiyay ka hor inta aan la dhoofin si loo hubiyo in alaabta la siiyo macaamiisha ay yihiin kuwo tayo sare leh.