Nema 14 (35mm) matoorrada jaranjarada ah ee xiran
>> Sharaxado Gaaban
| Nooca Baabuurta | Laba-cirifoodka |
| Xagasha tilaabada | 1.8° |
| Voltage (V) | 1.8 / 2.9 |
| Hadda (A) | 1.5 |
| Iska caabin (Ohms) | 1.23 / 1.9 |
| Inductance (mH) | 1.4 / 3.2 |
| Xadhkaha rasaasta | 4 |
| Qabashada Torque (Nm) | 0.14 / 0.2 |
| Dhererka Baabuurka (mm) | 34/47 |
| Codeeyaha | 1000CPR |
| Heerkulka deegaanka | -20 ℃ ~ +50 ℃ |
| Heerkulka Sare u kaca | 80K Max. |
| Xoogga Dielectric | 1mA ugu badnaan@ 500V, 1KHz, 1sek |
| Iska caabinta dahaarka | 100MΩ Min.@500Vdc |
>> Shahaadooyinka
>> Qalabka Korontada
| Cabbirka Matoorka | Voltage /Wejiga (V) | Hadda /Wejiga (A) | iska caabin /Wejiga (Ω) | Inductance /Wejiga (mH) | Tirada Xadhkaha rasaasta | Rotor Inertia (g.cm2) | Qabashada Torque (Nm) | Dhererka Matoorka L (mm) |
| 35 | 1.8 | 1.5 | 1.23 | 1.4 | 4 | 20 | 0.14 | 34 |
| 35 | 2.9 | 1.5 | 1.9 | 3.2 | 4 | 30 | 0.2 | 47 |
>> Halbeegyada farsamada guud
| Nadiifinta shucaaca | 0.02mm ugu badnaan (450g oo raran) | Iska caabin dahaarka | 100MΩ @500VDC |
| Axial nadiifinta | 0.08mm ugu badnaan (450g oo raran) | Awoodda korontada | 500VAC, 1mA, 1s@1KHZ |
| Xamuulka shucaaca ugu badan | 25N (20mm laga soo bilaabo dusha flange) | fasalka dahaarka | Fasalka B (80K) |
| Culayska axial ee ugu sarreeya | 10N | Heerkulka deegaanka | -20 ℃ ~ +50 ℃ |
>> 35IHS2XX-1.5-4A sawirka sawir qaade
| Qaabeynta pin (Ka duwan) | ||
| Pin | Sharaxaada | Midabka |
| 1 | GND | Madow |
| 2 | Vcc | Casaan |
| 3 | Ch A+ | Cagaaran |
| 4 | Ch A- | bunni |
| 5 | Ch B- | Cawlan |
| 6 | Ch B+ | Caddaan |
| Qaabeynta pin (Ka duwan) | ||
| Pin | Sharaxaada | Midabka |
| 1 | GND | Madow |
| 2 | Vcc | Casaan |
| 3 | Ch A+ | Cagaaran |
| 4 | Ch A- | bunni |
| 5 | Ch B- | Cawlan |
| 6 | Ch B+ | Caddaan |
| 7 | Ch Z+ | Jaalle |
| 8 | Ch Z- | Orange |
>> Anaga ku saabsan
Thinker Motion waa bixiyaha xalinta dhaqaaqa toosan oo heersare ah oo heersare ah.Shirkaddu waxay ka gudubtay shahaadada ISO9001, alaabteedu waxay dhaaftay shahaadada RoHS iyo CE, waxayna leedahay 22 shatiyo alaab ah.
Had iyo jeer waxaan mudnaanta siinnaa baahiyaha macaamiisheena waxaana naga go'an inaan siino macaamiisheena alaab iyo adeegyo tayo sare leh.Hadda waxaan u adeegnaa ilaa 600 oo macaamiil ah.
Waxaan haynaa 8 xabbo oo CNC ah, 1 mashiinka wax lagu shiidayo ee CNC, 1 mashiinka goynta siliga, iyo qaar ka mid ah qalabka kale ee mashiinada.Waxaan awood u leenahay in aan mashiinno inta badan qaybaha aan caadiga ahayn ee nafteena guriga si aan u gaabinno wakhtiga hogaanka ee alaabta la habeeyey, iyo in aan siino macaamiisheena khibrad wax iibsiga oo wanaagsan.Caadiyan, wakhtiga rasaasta ee alaabtayada kaashashka matoorka rasaasta ayaa ah 1 todobaad gudahood, wakhtiga hogaanka kubadana waa ilaa 10 maalmood.
